Backcall
DMS-1100-10TS
Description
The DMS-1100-10TS configurable switch is equipped with 8 2.5GBase-T twisted-pair ports and 2 10GBase-X SFP+ ports for high-speed backbone connection. Supporting 2.5 Gigabit Ethernet technology, this switch is ideal for 802.11ac Wave 2 wireless access points, while 10 Gigabit SFP+ uplink ports provide high-bandwidth connectivity for larger LANs.
Easy integration into existing network and investment protection
The DMS-1100-10TS switch supports the IEEE 802.3bz 2.5GBase-T standard, which allows you to transfer data at speeds up to 2.5 Gbps using category 5e cables over a distance of up to 100 m. Using IEEE 802.3bz technology, DMS-1100 -10TS improves the efficiency of existing cabling infrastructure, realizing the full benefits of 802.11ac Wave 2 wireless access points and significantly increasing bandwidth while maintaining user investment and meeting the demands of tomorrow. Backwards compatible with the IEEE 802.3ab 1000Base-T standard, this switch can easily be integrated into an existing Gigabit Ethernet network.
Level 2 features
The DMS-1100-10TS supports a full set of Layer 2 features including Port Mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). In addition, the switch supports cable diagnostics and Loopback Detection, allowing administrators to quickly and easily troubleshoot network problems. The Loopback Detection function is used to detect loops and automatically disable the port where a loop is detected. The cable diagnostic function is designed to determine the type of cable failure.
Convenient management
The DMS-1100-10TS switch supports management using the D-Link Network Assistant utility. This utility automatically detects and displays D-Link Smart series switches that belong to the same L2 network segment. Thanks to this utility, the user does not need to change the IP address of his computer, which simplifies the initial installation of the switch. The user has access to advanced configuration and basic settings for detected devices, such as changing the password and updating the software. The DMS-1100-10TS also supports D-View 7. D-View 7 is a network management system that allows you to manage the most important parameters such as uptime, reliability, flexibility and security.
Typical solutions using D-Link multi-gigabit equipment
Solutions based on the DMS-1100-10TS multi-gigabit switch and DGE-562T network adapter are designed for use in large corporate networks and in small and medium-sized businesses to increase the bandwidth of the network infrastructure without additional investment in upgrading the existing cable system.
D-Link's multi-gigabit solution provides:
connection to the network backbone at speeds up to 10 Gbps;
access to servers at speeds up to 2.5 Gbps;
upgrading employee workstations to work with bandwidth-intensive applications.
The DMS-1100-10TS configurable switch is equipped with 8 2.5GBase-T twisted-pair ports and 2 10GBase-X SFP+ ports for high-speed backbone connection. Supporting 2.5 Gigabit Ethernet technology, this switch is ideal for 802.11ac Wave 2 wireless access points, while 10 Gigabit SFP+ uplink ports provide high-bandwidth connectivity for larger LANs.
Easy integration into existing network and investment protection
The DMS-1100-10TS switch supports the IEEE 802.3bz 2.5GBase-T standard, which allows you to transfer data at speeds up to 2.5 Gbps using category 5e cables over a distance of up to 100 m. Using IEEE 802.3bz technology, DMS-1100 -10TS improves the efficiency of existing cabling infrastructure, realizing the full benefits of 802.11ac Wave 2 wireless access points and significantly increasing bandwidth while maintaining user investment and meeting the demands of tomorrow. Backwards compatible with the IEEE 802.3ab 1000Base-T standard, this switch can easily be integrated into an existing Gigabit Ethernet network.
Level 2 features
The DMS-1100-10TS supports a full set of Layer 2 features including Port Mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). In addition, the switch supports cable diagnostics and Loopback Detection, allowing administrators to quickly and easily troubleshoot network problems. The Loopback Detection function is used to detect loops and automatically disable the port where a loop is detected. The cable diagnostic function is designed to determine the type of cable failure.
Convenient management
The DMS-1100-10TS switch supports management using the D-Link Network Assistant utility. This utility automatically detects and displays D-Link Smart series switches that belong to the same L2 network segment. Thanks to this utility, the user does not need to change the IP address of his computer, which simplifies the initial installation of the switch. The user has access to advanced configuration and basic settings for detected devices, such as changing the password and updating the software. The DMS-1100-10TS also supports D-View 7. D-View 7 is a network management system that allows you to manage the most important parameters such as uptime, reliability, flexibility and security.
Typical solutions using D-Link multi-gigabit equipment
Solutions based on the DMS-1100-10TS multi-gigabit switch and DGE-562T network adapter are designed for use in large corporate networks and in small and medium-sized businesses to increase the bandwidth of the network infrastructure without additional investment in upgrading the existing cable system.
D-Link's multi-gigabit solution provides:
connection to the network backbone at speeds up to 10 Gbps;
access to servers at speeds up to 2.5 Gbps;
upgrading employee workstations to work with bandwidth-intensive applications.
Contacts
© 2022 Lifeinteractive Global
Customer Support