DGS-1100-08PLV2

The configurable EasySmart DGS-1100-08PLV2 series switch with 8 10/100/1000Base-T ports (4 ports with PoE support) is designed for use in small and medium business networks. Management, diagnostic and troubleshooting functions, as well as energy-saving technology allows you to use the DGS-1100-08PLV2 to solve various problems.

D-Link Green energy-saving technology
Switch DGS-1100-08PLV2 complies with the standard IEEE 802.3az Energy-Efficient Ethernet and consumes less power at a low traffic volume. The use of EEE-compatible devices allows small and medium-sized businesses to save money by reducing operating costs, including those associated with the purchase of cooling equipment. The DGS-1100-08PLV2 also supports D-Link Green technology, which automatically reduces power consumption. The switch detects the connection status of each port and automatically shuts down inactive ports.

Easy Management
The DGS-1100-08PLV2 switch supports management with a special utility D-Link Network Assistant, as well as via the Web-interface. The utility allows you to detect D-Link Smart Series switches belonging to the same L2 network segment, which simplifies initial installation of the switch. Advanced configuration and basic configuration of discovered devices, such as password changes and software upgrades, are available to the administrator. A user-friendly Web-based interface gives network administrators the ability to manage the switch at the port level. The interface is accessible via a Web-browser and allows you to control the switch from any computer connected to the network.

Surveillance VLAN and bandwidth management
Switch DGS-1100-08PLV2 supports Surveillance VLAN technology for deploying video surveillance systems. This feature places video traffic on a separate VLAN where it is assigned the highest priority of service. Support for Surveillance VLANs ensures quality video traffic delivery and protection, while reducing the cost associated with purchasing additional hardware. Bandwidth management features allow network administrators to reserve bandwidth for applications that require the highest priority or high bandwidth.

Advanced feature set
The DGS-1100-08PLV2 switch supports advanced security features such as Static MAC, network storm protection and IGMP Snooping. Static MAC function allows you to create a "white" list of MAC-addresses, allowing access only to authorized devices. The Network Storm Protection feature is required to limit broadcast, multicast or unknown unicast traffic to a specified threshold. The switch blocks or discards packets that fall under this threshold, as large amounts of such traffic can cause network congestion. The IGMP Snooping feature can reduce the amount of multicast traffic and increase network performance.

Easy troubleshooting
The DGS-1100-08PLV2 supports cable diagnostic and Loopback Detection. Loopback Detection detects loops and automatically shuts down the port where a loopback is detected. The Cable Diagnostic function is designed to determine the condition of the twisted pair, as well as the type of cable fault.

Power over Ethernet
Four ports DGS-1100-08PLV2 supports the IEEE 802.3at PoE standard. Each PoE port supplies power up to 30 watts for a total switch budget of 80 watts, allowing users to connect to the DGS-1100-08PLV2 devices that are compatible with the standard 802.3at. This allows equipment to be placed in hard-to-reach locations, regardless of the location of electrical outlets, and minimizes cabling.