Backcall
DGS-1210-52MP/FL
The DGS-1210-52MP managed Layer 2 switch, equipped with 48 10/100/1000Base-T ports with PoE support and 4 100/1000Base-T/SFP combo ports, supports D-Link Green technology and advanced management and security functions, ensuring high performance and network scaling. Management functions include SNMP, Web-based management, and command-line interface (CLI) via Telnet and SSH. This switch is equipped with intelligent fans that are able to change the rotation speed depending on the temperature, which saves energy and reduces noise.
Power over Ethernet
48 ports of this switch support Power over Ethernet technology. PoE ports supply power up to 30 watts with a total switch budget of 370 watts, which allows users to connect devices compatible with 802.3af and 802.3at standards to the DGS-1210-52MP. This allows you to place the equipment in hard-to-reach places regardless of the location of electrical outlets and minimize cable laying.
Level 2 functions
The DGS-1210-52MP switch supports a full set of Layer 2 functions, including IGMP Snooping, Port Mirroring, Spanning Tree Protocol (STP) and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows you to optimize the load on the switch to increase the reliability of data transmission. Supporting speeds on each of the ports up to 2000 Mbit/s in full duplex mode, the switch provides the high performance needed to connect workstations. The switch supports the cable diagnostics function and the Loopback Detection function. The Loopback Detection function is used to detect loops and automatically disable the port on which the loop is detected. The cable diagnostics function is designed to determine the state of the twisted pair, as well as the type of cable malfunction.
Protection against static electricity
All Ethernet ports support built-in protection against static electricity up to 6 kV. It ensures the stability of the copper ports to the induced voltage and prevents damage to the switch and the devices connected to it.
Network security
The D-Link Safeguard Engine function provides an effective mechanism for protecting the switch from viruses and malicious traffic. Authentication based on the 802.1X port allows you to use an external RADIUS server to authorize users. In addition, the Access Control Lists (ACLs) feature increases network security by filtering out traffic originating from unauthorized MAC/IP addresses.
Convenient management
The DGS-1210-52MP switch supports the D-View 7 program and the Command line interface (CLI) via Telnet and SSH. D-View 7 is a network management system that allows you to manage the most important parameters, such as operability, reliability, flexibility and security.
Energy saving
Thanks to D-Link Green technology, the DGS-1210-52MP switch saves energy without compromising performance and functionality. The switch determines the connection status for each port and provides automatic transition of inactive ports to sleep mode. Thanks to the chipset used, the DGS-1210-52MP switch allows you to significantly reduce energy consumption.
Power over Ethernet
48 ports of this switch support Power over Ethernet technology. PoE ports supply power up to 30 watts with a total switch budget of 370 watts, which allows users to connect devices compatible with 802.3af and 802.3at standards to the DGS-1210-52MP. This allows you to place the equipment in hard-to-reach places regardless of the location of electrical outlets and minimize cable laying.
Level 2 functions
The DGS-1210-52MP switch supports a full set of Layer 2 functions, including IGMP Snooping, Port Mirroring, Spanning Tree Protocol (STP) and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows you to optimize the load on the switch to increase the reliability of data transmission. Supporting speeds on each of the ports up to 2000 Mbit/s in full duplex mode, the switch provides the high performance needed to connect workstations. The switch supports the cable diagnostics function and the Loopback Detection function. The Loopback Detection function is used to detect loops and automatically disable the port on which the loop is detected. The cable diagnostics function is designed to determine the state of the twisted pair, as well as the type of cable malfunction.
Protection against static electricity
All Ethernet ports support built-in protection against static electricity up to 6 kV. It ensures the stability of the copper ports to the induced voltage and prevents damage to the switch and the devices connected to it.
Network security
The D-Link Safeguard Engine function provides an effective mechanism for protecting the switch from viruses and malicious traffic. Authentication based on the 802.1X port allows you to use an external RADIUS server to authorize users. In addition, the Access Control Lists (ACLs) feature increases network security by filtering out traffic originating from unauthorized MAC/IP addresses.
Convenient management
The DGS-1210-52MP switch supports the D-View 7 program and the Command line interface (CLI) via Telnet and SSH. D-View 7 is a network management system that allows you to manage the most important parameters, such as operability, reliability, flexibility and security.
Energy saving
Thanks to D-Link Green technology, the DGS-1210-52MP switch saves energy without compromising performance and functionality. The switch determines the connection status for each port and provides automatic transition of inactive ports to sleep mode. Thanks to the chipset used, the DGS-1210-52MP switch allows you to significantly reduce energy consumption.
Contacts
© 2022 Lifeinteractive Global
Customer Support