DGS-6600-24SC2XS-C

Description
Module with 12 100/1000Base-X SFP ports, 12 combo 100/1000Base-T/SFP ports, 2 10GBase-X SFP+ ports and MPLS support for DGS-6604/6608 chassis.
Characteristics
Standards
• IEEE 802.3, 802.3u, 802.3ab, 802.3ae, 802.3aq, 802.3z
• Support for half/full duplex operation
• IEEE 802.3x flow control and back pressure support
• Support for transceivers that comply with SFF-8431 standards

Support for SFP transceivers
• DEM-310GT (1000Base-LX, single-mode fiber, 10 km)
• DEM-311GT (1000Base-SX, multimode fiber, 550 m)
• DEM-312GT2 (1000Base-SX, multimode fiber, 2 km)
• DEM-314GT (1000Base-LHX, single-mode fiber, 50 km)
• DEM-315GT (1000Base-ZX, single-mode fiber, 80 km)
• DEM-330T/R (WDM 1000Base-BX transceiver, single-mode fiber, 10 km)
• DEM-331T/R (WDM 1000Base-BX transceiver, single-mode fiber, 40 km)
• DEM-210 (100Base-FX, single-mode fiber, 15 km)
• DEM-211 (100Base-FX, multimode fiber, 2 km)
• DEM-220T/R (WDM 100Base-BX transceiver, single-mode fiber, 20 km)
• DGS-712 (Copper transceiver 1000Base-T)

Standards supported by 10/100/1000 Mbps ports
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• Support for half/full duplex operation
• IEEE 802.3x flow control in full duplex operation

Standards Supported by SFP+ Ports
• IEEE 802.3ae
• IEEE 802.3aq

Support for SFP+ transceivers
• DEM-431XT (10GBase-SR (no DDM), 80m: OM1 & OM2 multimode fiber, 300m: OM3 multimode fiber)
• DEM-431XT-DD (10GBase-SR (with DDM), 80m: OM1 & OM2 multimode fiber, 300m: OM3 multimode fiber)
• DEM-432XT (10GBase-LR (no DDM), 10km)
• DEM-432XT-DD (10GBase-LR (with DDM), 10 km) 
• DEM-433XT (10GBase-ER (without DDM), 40 km)
• DEM-433XT-DD (10GBase-ER (with DDM), 40 km) 
• DEM-434XT (10GBase-ZR (without DDM), 80 km)
• DEM-435XT (10GBase-LRM (no DDM), 220m: OM1 & OM2 multimode fiber, 300m: OM3 multimode fiber)
• DEM-435XT-DD (10GBase-LRM (with DDM), 220m: OM1 & OM2 multimode fiber, 300m: OM3 multimode fiber)
• DEM-436XT-BXU (10GBase-LR BiDi (no DDM), 20km, TX: 1270nm, RX: 1330nm)
• DEM-436XT-BXD (10GBase-LR BiDi (no DDM), 20km, TX: 1330nm, RX: 1270nm)
• DEM-310GT (1000Base-LX, single-mode fiber, 10 km)
• DEM-311GT (1000Base-SX, multimode fiber, 550 m)
• DEM-312GT2 (1000Base-SX, multimode fiber, 2 km)
• DEM-314GT (1000Base-LHX, single-mode fiber, 50 km)
• DEM-315GT (1000Base-ZX, single-mode fiber, 80 km)
• DEM-330T/R (WDM 1000Base-BX transceiver, single-mode fiber, 10 km)
• DEM-331T/R (WDM 1000Base-BX transceiver, single-mode fiber, 40 km)

Direct Connect SFP+ Cables
• DEM-CB100S (10G, 1m)
• DEM-CB300S (10G, 3m)
• DEM-CB700S (10G, 7m)

Switching matrix
• 88 Gbps

Packet Forwarding Rate
• 268.44 Mpps

CPU
• 400 MHz

RAM
• 1 GB

Flash memory
• Prom 4 MB, Runtime 128 MB

Software functions
Level 2 features:
• MAC address table
- 32K entries per I/O module
• Flow control
- 802.3x flow control 
- Prevention of blocking HOL
• Jumbo frame up to 9732 bytes
• IGMP Snooping
- IGMP v1/v2/v3 Snooping
- Support 1K groups
- IGMP Proxy
• Spanning Tree
- 802.1D STP
- 802.1w RSTP
- 802.1s MSTP
• 802.3ad link aggregation
- Max. 128 groups per device, 8 ports per group
- Support for aggregation between ports of different modules (cross-module trunk)
• Port mirroring
- One to One
-Many-to-One
- Tx/Rx/Both
• ERPS (Ethernet Ring Protection Switching)
- MLD v1 Snooping
- Support 1K groups
- MLD Snooping Fast Leave host based

VLAN :
• VLAN groups
- Max. 4K VLAN groups
• 802.1Q Tagged VLAN
• 802.1v Protocol VLAN
• Port Based VLAN
• Double VLAN (Q-in-Q)
- Q-in-Q based on port

Level 3 features:
• Max. number of IP interfaces: 4K
• VRRP
• IPv6 tunneling
- Manual setting
-ISATAP
-6to4
• IPv6 Ready Phase 2

Layer 3 routing
• 12K entries in the IPv4/IPv6 routing table
• 8K entries in IPv4/v6 layer 3 switching table
• 256 static route entries
• R.I.P.
- RIPv1/v2
- RIPng (IPv6)
• OSPF
OSPF v2
- OSPF v3 (IPv6)
- Passive OSPF interface
- Stub/NSSA Area
- OSPF Equal Cost Route
• BGP v4

MPLS
• L2 VPN
- Point-to-point VPWS for E-line service
- Point-to-multipoint VPLS for E-LAN ​​service

Multicast
• 1K multicast groups
• PIM-DM
• PIM-SM
• IGMPv1/v2/v3
• DVMRP v3

QOS:
• 802.1p Class of Service (CoS)
• 8 queues per port
• Queue processing:
- Strict Priority
- Weighted Round Robin (WRR)
- Strict+WRR
- Deficit Round Robin (DRR)
- Strict+DRR
• CoS based:
- switch port
- VLAN ID
- 802.1p priority queues
- MAC addresses
- IPv4/v6 addresses
- DSCP
- protocol type
- IPv6 traffic class
- IPv6 flow labels
- TCP/UDP port
• Support for the following actions for streams:
- Setting 802.1p priority labels
- Setting TOS/DSCP labels
- Bandwidth control
- Guaranteed Bandwidth (CIR), up to 64 Kbps 
• Bandwidth control
- Port based (in/out, up to 64Kbps)
• Time based QoS

ACLs (Access Control Lists):
• Ingress / Egress ACL
• ACL based:
- 802.1p priority
- VLAN ID
- MAC addresses
- IPv4/v6 address or IP prefix
- DSCP/IP priority
- type of IP protocol
- TCP/UDP port numbers
- combinations of the above
• ACL based on time

Safety:
• Port Security: up to 16 MAC addresses per port
• Broadcast/multicast/unicast storm protection
• DoS attack prevention 

AAA :
• 802.1X
- Port based access control
- Access control based on MAC addresses
- Dynamic VLAN assignment
• Accounts with 3 levels of access rights
• Authentication to a RADIUS server

D-Link Green:
• Power saving by connection status
• Scheduled PoE

Management :
• Command Line Interface (CLI)
• Telnet server
• Telnet client
• TFTP
• DHCP server
• DHCP Relay
• DHCP Relay option 82
• SNMPv1/v2c
• SNMP Traps
• System log
• RMON v1
- Support groups 1,2,3,9
• Flash file system
• Support for multiple software versions
• Support for multiple configuration versions
• Debug Command
• SNTP
• Trusted host

polishing type
UPC
The weight
• 3.33 kg

Power consumption
• 137.67 W

Heat dissipation
• 469.75 Btu/hour

Working temperature
• From 0° to 50°C

Storage temperature
• From -40° to 70°C

Humidity
• Operating: 10% to 90% RH (non-condensing)
• Storage: 5% to 90% RH