The EasySmart DGS-1100-10MP is a configurable switch with 8 10/100/1000Base-T ports with PoE support and 2 1000Base-X SFP ports designed for small and medium business networks. PoE support and high power budget make the DGS-1100-10MP switch an optimal solution for video surveillance. Management, diagnostic and troubleshooting functions, as well as energy-saving technology allows you to use the DGS-1100-10MP for various tasks.
Power over Ethernet 8 ports of the switch DGS-1100-10MP supports standards IEEE 802.3at/802.3af PoE. Each port supplies power up to 30 watts for a total switch budget of 130 watts, which allows users to connect to the DGS-1100-10MP devices that support PoE technology. This greatly simplifies the installation of networking equipment, allowing it to be placed in hard-to-reach places regardless of the location of electrical outlets, as well as minimize cabling. Non-PoE devices can be connected using a PoE adapter, such as the Gigabit DPE-301GS.
Easy management The DGS-1100-10MP switch supports management with a special utility D-Link Network Assistant as well as via the Web-interface. The utility allows you to detect D-Link Smart series switches belonging to the same network segment L2, which simplifies the initial setup of the switch. Advanced configuration and basic configuration of discovered devices, such as password changes and software updates, are available to the administrator. A user-friendly Web interface gives network administrators the ability to manage the switch at the port level. The interface is accessible via a Web-browser and allows you to control the switch from any computer connected to the network.
Surveillance VLAN and bandwidth management DGS-1100-10MP switch supports Surveillance VLAN technology for video surveillance deployments. This feature places video traffic on a separate VLAN where it is assigned the highest priority of service. Support for Surveillance VLANs ensures quality video traffic delivery and protection, while reducing the cost associated with purchasing additional hardware. Bandwidth management features allow network administrators to reserve bandwidth for applications that require the highest priority or high bandwidth.
Advanced feature set The DGS-1100-10MP switch supports advanced security features such as Static MAC, network storm protection and IGMP Snooping. Static MAC function allows you to create a "white" list of MAC-addresses, allowing access only to authorized devices. The Network Storm Protection feature is required to limit broadcast, multicast or unknown unicast traffic to a specified threshold. The switch blocks or discards packets that fall under this restriction, as large amounts of such traffic can cause network congestion. The IGMP Snooping feature can reduce the amount of multicast traffic and increase network performance.
Easy troubleshooting The DGS-1100-10MP switch supports cable diagnostics and Loopback Detection. Loopback Detection is used to detect loops and automatically shuts down the port where a loop is detected. The Cable Diagnostic feature is used to determine the condition of the twisted pair cable and the type of cable fault.
D-Link Green energy-saving technology The DGS-1100-10MP switch complies with the IEEE 802.3az Energy Efficient Ethernet standard and consumes less power with less traffic. The use of EEE-compliant devices allows small and medium-sized businesses to save money by reducing operating costs, including those associated with the purchase of cooling equipment. The DGS-1100-10MP also supports D-Link Green technology, which automatically reduces power consumption. The switch detects the connection status of each port and automatically powers down inactive ports.