Backcall
AV Production DVI-OPT-TR-RS
DVI-OPT-TR-RS Optical transmitter and receiver kit for transmitting DVI or HDMI signals over a single fiber optic line. Supports resolutions up to 1920×1200. No galvanic coupling between signal source and display device completely eliminates electromagnetic interference in the signal path. Compact size allows concealed mounting of receiver and transmitter.
Features
The DVI Fiber Optic Receiver/Transmitter can transmit using either a multimode fiber optic cable up to 500 m or, if longer distances (up to 1500 m) are required, using a single-mode fiber optic cable. Transmission is via a single cable with LC connectors.
DVI signal receiver-transmitter over fiber optic cable converts electrical signals into optical signals and decodes the optical signals back into electrical signals. Provides a single-channel DVI-D connection (without support for HDCP data protection).
With the function of reading EDID information to display the signal correctly on all display devices DVI receiver-transmitter over fiber optic cable transmits the video source (computer) data (manufacturer name, resolution, frequency range) about the characteristics of the connected display devices (monitors, panels, projectors). The device stores EDID data and allows you to quickly configure the system in case of reconnection of the display device.
The Transmitter Receiver comes with two network adapters. The Receiver-Transmitter system must be powered by an external power adapter.
The receiver-transmitter system provides full galvanic isolation (no contact connection) between video source and receiver. This ensures that there are no difficulties caused by improper grounding of the electrical network, which is quite common.
Supports resolutions greater than WUXGA (1920×1200) at 60Hz refresh rate, or 1.65Gbps bandwidth per graphics channel.
Has a range of up to 1500 m when using two 9(8)/125 µm single-mode fibers and up to 500 m when using two 62.5(50)/125 µm multi-mode fibers with LC connectors.
Features
The DVI Fiber Optic Receiver/Transmitter can transmit using either a multimode fiber optic cable up to 500 m or, if longer distances (up to 1500 m) are required, using a single-mode fiber optic cable. Transmission is via a single cable with LC connectors.
DVI signal receiver-transmitter over fiber optic cable converts electrical signals into optical signals and decodes the optical signals back into electrical signals. Provides a single-channel DVI-D connection (without support for HDCP data protection).
With the function of reading EDID information to display the signal correctly on all display devices DVI receiver-transmitter over fiber optic cable transmits the video source (computer) data (manufacturer name, resolution, frequency range) about the characteristics of the connected display devices (monitors, panels, projectors). The device stores EDID data and allows you to quickly configure the system in case of reconnection of the display device.
The Transmitter Receiver comes with two network adapters. The Receiver-Transmitter system must be powered by an external power adapter.
The receiver-transmitter system provides full galvanic isolation (no contact connection) between video source and receiver. This ensures that there are no difficulties caused by improper grounding of the electrical network, which is quite common.
Supports resolutions greater than WUXGA (1920×1200) at 60Hz refresh rate, or 1.65Gbps bandwidth per graphics channel.
Has a range of up to 1500 m when using two 9(8)/125 µm single-mode fibers and up to 500 m when using two 62.5(50)/125 µm multi-mode fibers with LC connectors.
Contacts
© 2022 Lifeinteractive Global
Customer Support